Driveway Gate Details

How do you unbend a bent metal pole? Details inside?

My backyard is enclosed with a fence. The fence is secured with a Gate and a 4 foot pole that is placed in a hole in the ground to be closed. The other day I wasn’t paying attention when pulling in the driveway and bent the bottom of the pole with the front bumper of my 1995 Pontiac Sunfire. The car is fine but how do I fix the pole? How much money might this cost me?
went I hit the pole it was closed and in its normal hole to keep things secure. How can I remove it since it won’t lift as it would normally do so since its bent? I had an idea of trying to saw off the bent part, good or bad idea?

Pull hard, it is jammed. You may have to pry it out with a bar or shovel, put a piece of wood under the tool so you don’t damage the drive. Use your car jack and a strong rope or piece of chain. Take the pipe to the hardware or fence store for the right one. To try to straighten galvanized pipe is extremely hard.
Good luck.

ALL SECURE – Custom doors, gates, fences – Youngstown

Compare_______________________________________________________

Tree-Lined Driveway Leads To a Gate $39.99 Taylor S. Kennedy Tree-Lined Driveway Leads To a Gate – Photographic Print

Driveway and Gate Through a Peaceful Woodland Setting $39.99 Raymond Gehman Driveway and Gate Through a Peaceful Woodland Setting – Photographic Print

Golden Gate Park Driveway View with Horse Carriages – San Francisco, CA $19.99 Golden Gate Park Driveway View with Horse Carriages – San Francisco, CA – Premium Poster

Details of a Gate, Chandpole Gate, Jaipur, Rajasthan, India $29.99 Panoramic Images Details of a Gate, Chandpole Gate, Jaipur, Rajasthan, India – Photographic Print

______________________________________________________________